Midi in] terminal (3), Connecting to external equipment – Pioneer Toraiz SQUID - Creative Multitrack Sequencer User Manual
Page 154
Connecting to external equipment
154
En
[MIDI THRU/OUT2] terminal set to [THRU (MIDI IN)]/[THRU
(USB IN)]
Send the MIDI messages received with the
[MIDI IN]
terminal or the
[USB-B]
terminal to an external MIDI device connected to the
[MIDI
THRU/OUT2]
terminal without changing it when
[OUT2 Mode]
(page 134) of the
[MIDI OUT]
setting in the GLOBAL menu is set to
[THRU (MIDI IN)]
or
[THRU (USB IN)]
.
Note
Set the MIDI transmit channel of the transmitting device and the MIDI
receive channel of the receiving device correctly.
[MIDI OUT1] terminal / [MIDI THRU/OUT2] terminal set to
[OUT+MIDI IN] or [OUT+USB IN]
When you set
[OUT1 Mode]
of the
[MIDI OUT]
setting in the GLOBAL
menu to
[OUT+MIDI IN]
or
[OUT+USB IN]
, the unit merges the MIDI
messages and the MIDI messages received with the
[MIDI IN]
terminal
or the
[USB-B]
terminal and outputs it.
Note
Set the MIDI receive channel of the receiving device correctly
according to the application.
[MIDI IN] terminal (3)
Connect the MIDI OUT terminal of an external sequencer, etc. to the
[MIDI IN]
input terminal using a MIDI cable.
•
You can control the sequence playback operation on the unit from an
external MIDI device by sending MIDI messages such as the Start,
Stop, and Continue messages to the
[MIDI IN]
terminal.
•
For the terminal and settings of the related, refer to the following.
– “[MIDI IN] setting” (page 132)
– “[Sync Common] setting” (page 124)