Restarting a sequence, Basic operation – Pioneer Toraiz SQUID - Creative Multitrack Sequencer User Manual
Page 27
Basic Operation
27
En
Recording the performance information into a sequence
in real time (Real-time recording)
The information of the pad performance, the Harmonizer performance,
and the automation can be recorded into a sequence.
1 Press the
[
]
(record) button.
The button lights up in red and recording standby mode is enabled.
2 Press the
[
]
(play) button.
The button lights up in green. When the sequence starts playing, recordable
mode is enabled.
•
The following performance information can be recorded into a sequence;
– Performance information using the 16-pads in Scale mode (page 39)
– Performance information using the 16-pads in Chord mode (page 44)
– Performance information made in combination with the
[HARMONIZER]
buttons (page 71)
– Performance information using the 16-pads in Transpose mode (page 46)
– Performance information of the
[GROOVE BEND]
slider (page 93)
– Performance information of the
[SPEED CONTROL]
buttons (page 99)
– Performance information of the
[RHYTHMIC CONTROL]
buttons
Restarting a sequence
You can restart a sequence from the first step without stopping the
playback.
1 Hold down the
[SHIFT]
button and press the
[
]
(play) button.
The sequence restarts regardless of whether it is being played, paused, or
stopped.