Pioneer Toraiz SQUID - Creative Multitrack Sequencer - Manual (Page 62)

Step edit section
62
En
Step recording the control value on the 16-pads
1 Hold down the [SHIFT] button and press the [TRIGGER] button.
The [TRIGGER] button flashes in orange and the 16-pads switches to CC
mode. The controller number and control value are shown on the display.
(1) Controller number, (2) Control value
2 Turn the rotary selector to switch the knob to be assigned with the
controller number.
The knob to be assigned is highlighted on the display and the 16-pads
indicates the assignment by the lighting color as follows.
[CC1] : [PITCH/CC1] knob 16-pads: Blue
[CC2] : [GATE/CC2] knob 16-pads: Light blue
[CC3] : [VELOCITY/CC3] knob 16-pads: Green
[CC4] : [COUNT/CC4] knob 16-pads: Yellow green
[CC5] : [DIVIDE/CC5] knob 16-pads: Yellow
• When you turn the knob that you want to assign to, the knob is assigned to
instantly.
(1) Knob