Pioneer Toraiz SQUID - Creative Multitrack Sequencer - Manual (Page 160)

Connecting to external equipment
160
En
Synchronizing the unit and an external DIN SYNC
compatible device to play
You can play the unit in sync with the connected device by connecting
the
[DIN SYNC OUT1] terminal or [DIN SYNC IN/OUT2] terminal on
the unit to the DIN SYNC IN terminal or DIN SYNC OUT terminal of a
DIN SINC-compatible sequencer or drum machine.
The DIN SYNC terminal can send and receive not only BPM
information as the timing clock but also control signals for playing and
pausing the synchronized performance by using signals such as Start,
Stop, and Continue.
Connecting
• Connect the [DIN SYNC OUT1] terminal or [DIN SYNC IN/OUT2]
terminal set to [OUT] of this unit to the DIN SYNC IN terminal of the
connected device.
• Connect the [DIN SYNC IN/OUT2] terminal set to [IN] of this unit to
the DIN SYNC OUT terminal of the connected device.