Pioneer Toraiz SQUID - Creative Multitrack Sequencer - Manual (Page 131)

Changing the settings
131
En
 IN Polarity
Setting value: − , +*
Set the polarity of the [CLOCK IN] terminal. − is falling and + is rising.
Check the specification of the connected equipment and select an
appropriate value.
• − :
Select when timing clock output of the connected equipment triggers
in falling of pulse (negative edge trigger).
Input of Negative logic (active low) when
[IN Sync Mode] is set to
[Gate] .
• +:
Select when timing clock output of the connected equipment triggers
in rising of pulse (positive edge trigger).
Input of Positive logic (active high) when
[IN Sync Mode] is set to
[Gate] .