Trig prob (trigger probability) settings, Setting the trigger probability, Trigger probability setting – Pioneer Toraiz SQUID - Creative Multitrack Sequencer User Manual
Page 144: Trigger probability rate, Changing the settings
Changing the settings
144
En
TRIG PROB (Trigger Probability) settings
Note
For the trigger probability, refer to “TRIG PROB (Trigger Probability)”
(page 103).
Setting the Trigger Probability
1 Hold down the
[SHIFT]
button and press the
[TRIG PROB]
button.
Trigger probability settings are shown on the display.
2 Turn the rotary selector to select the setting value.
The setting value is determined.
3 Press the rotary selector and press the
[BACK]
button, or hold
down the
[SHIFT]
button and press the
[TRIG PROB]
button.
The display returns to the former state.
Trigger Probability setting
The default setting is shown with *.
Trigger Probability Rate
Setting value: 10 % to 50 %* to 100 %
When 100 % is selected, all triggers are available, and there is no
difference in effect on the trigger probability.