Connecting to external equipment – Pioneer Toraiz SQUID - Creative Multitrack Sequencer User Manual
Page 167
Connecting to external equipment
167
En
Notes
•
When using a 5 PIN DIN conversion cable, use a conversion cable
that is a 1 PIN-RING, 3 PIN-TIP connection instead of a MIDI
conversion cable. The stereo mini-jack 5 PIN DIN conversion cable
for MIDI cannot be used for SYNC conversion because PIN 1 and
PIN 3 are not connected.
•
When triggering the
[CLOCK IN]
terminal with an audio signal
without using the Start/Stop signal, use a monaural mini-jack to
prevent noise in the Start/Stop signal input pin.
•
When using the audio signal as a trigger signal, input an appropriate
volume of signals containing keen attack/decay, such as pulse
signals or click sound.
•
Input audio signals at the level of 2 V or more.
•
When setting
[IN Sync Mode]
of the
[CLOCK]
setting in the
GLOBAL menu to
[Gate]
to Gate control the unit with the
[CLOCK
IN]
terminal, input the Gate signal of V-Trigger into the
[CLOCK IN]
terminal.
Also, sequence playback/stop cannot be controlled by inputting the
Start/Stop signals to the
[CLOCK IN]
terminal.
Set
[Sync Source]
of the
[Sync Common]
setting to an other than
[CLOCK]
. If it is set to
[CLOCK]
, the sequence playback will never
be performed even though the GATE signal is input.