Pioneer Toraiz SQUID - Creative Multitrack Sequencer - Manual (Page 65)

Step edit section
65
En
CV SLIDE mode
In this mode, each step can be set with CV Slide which changes the
PITCH value smoothly forward to the PITCH value of the next step
(pad). This mode is available when
[CV/GATE1] or [CV/GATE2] is set.
Setting CV SLIDE to a step
1 Hold down the [SHIFT] button and press the [TIE] button.
The [TIE] button flashes in orange and the 16-pads switches to CV Slide mode.
2 When there are multiple pages in the 16-pads, press the [  ] / [  ]
button to select a page.
The selected page is applied to the 16-pads.
• For details on pages, refer to “Changing the pattern length” (page 55).
3 Press the pad of the step to set CV Slide to.
The pad of the step where CV Slide is on lights up in purple.
The PITCH value can be changed smoothly from the step (pad) with CV Slide
to the next step (pad).
• Pressing the same pad toggles the CV Slide on and off.
Note
The MIDI output is not affected by CV Slide.