Pioneer Toraiz SQUID - Creative Multitrack Sequencer - Manual (Page 32)

Step edit section
32
En
Note
During a sequence playback, each pad lights up in white when a note
is triggered.
Selecting an output destination for the current track
1 Hold down the [SHIFT] button and turn the rotary selector to select
an output terminal.
The followings are selectable.
[None] (no output), [MIDI1] , [MIDI2] , [USB] , [CV/GATE1] , [CV/GATE2]
• The output terminal according to the display is as follows.
MIDI1:
[MIDI OUT1] terminal
MIDI2: [MIDI THRU/OUT2] terminal
USB: [USB-B] terminal
CV/GATE1: [CV OUT1] terminal, [GATE OUT1] terminal
CV/GATE2: [CV OUT2] terminal, [GATE OUT2] terminal
2 When selecting [MIDI1] , [MIDI2] , or [USB] , turn the rotary selector
to select a channel.
The followings are selectable.
• MIDI1 Ch.1 to 16
• MIDI2 Ch.1 to 16
• USB Ch.1 to 16
Notes
• Even if you turn the rotary selector without performing step 1, you can
select the output destination (terminal or channel) in the following
order.
[None] (no output), [MIDI1 Ch.1 to 16] , [MIDI2 Ch.1 to 16] , [USB
Ch.1 to 16] , [CV/GATE1] , [CV/GATE2]
• For settings other than output destinations, refer to “TRACK settings”
(page 145).