Connecting to external equipment – Pioneer Toraiz SQUID - Creative Multitrack Sequencer User Manual

Page 161

Connecting to external equipment

161

•

Select

[IN]

[OUT]

setting of the

[DIN SYNC IN/OUT2]

terminal

through

[OUT2 Mode]

of the

[DIN SYNC]

setting in the GLOBAL

menu. The factory default setting of the

[DIN SYNC IN/OUT2]

terminal is

[IN]

•

Use a MIDI cable (5PIN DIN cable) compatible with DIN SYNC for
this connection.

Notes

•

For the MIDI cable, use the cable with the 1 PIN and 3 PIN.

•

When using a mini-jack conversion cable, use a conversion DIN
SYNC-compatible cable with 1 PIN-RING and 3 PIN-TIP
connections, not a conversion cable for MIDI.
The pin arrangement of the

[DIN SYNC OUT1]

terminal and

[DIN

SYNC IN/OUT2]

terminal is as follows. (It is not compatible with

[MIDI]

terminals.)

(1) Start/Stop, (2) GND, (3) Clock, (4) Reset Start, (5) Continue Start

•

(For Reference) The pin arrangement of the MIDI terminal is as
follows.
(1) Non-connection, (2) GND, (3) Non-connection, (4) VTX/VRX,
(5) Signal