Pioneer Toraiz SQUID - Creative Multitrack Sequencer - Manual (Page 124)

Changing the settings
124
En
[Sync Common] setting
Set the common items on the timing clock.
The default setting is shown with *.
 Sync Source
Setting value: DIN MIDI, USB MIDI, DIN SYNC, CLOCK, Internal*
Set the clock source to be a master.
Note
If you change a setting value during sequence playback, the sequence
playback will stop.
 Master Clock Mode
Setting value: Disable, Enable*
Set the timing clock of the
[MIDI] terminal and [CLOCK] terminal.
When [Sync Source] is set to Internal, set the timing clock output to
Disable/Enable in the stop/pause state.
• Disable: The timing clock is output in the stop/pause state.
• Enable: The timing clock is output ordinarily.
Note
Regardless of the [Master Clock Mode] setting, the timing clock is
always output from the [DIN SYNC] terminal.