Pioneer Toraiz SQUID - Creative Multitrack Sequencer - Manual (Page 123)

Changing the settings
123
En
 GATE1 Polarity
Setting value: − , +*
Set the polarity of the [GATE OUT1] terminal. − is a negative logic and
+ is a positive logic.
Check the Gate input specification of the connected equipment and
select an appropriate value.
Set the operation state of the terminal during Gate on and Gate off with
[GATE1 Mode] (page 122).
• − : Negative logic (active low) output
0 V or short (short-circuit) in the gate-on. 5V, 10V, or open (open) in
the gate-off
• +: Positive logic (active low) output
5V, 10V or open (open) in the gate-on. 0 V or short (short-circuit) in
the gate-off
 GATE2 Mode
Setting value: S-Trigger, V-Trigger 5V*, V-Trigger 10V
Set the output method of the
[GATE OUT2] terminal.
Check the Gate input specification of the connected equipment and
select an appropriate value. For details on the setting value, refer to
“GATE1 Mode” (page 122).
 GATE2 Polarity
Setting value: − , +*
Set the polarity of the [GATE OUT2] terminal. − is a negative logic and
+ is a positive logic.
Check the Gate input specification of the connected equipment and
select an appropriate value.
Set the operation state of the terminal during Gate on and Gate off with
[GATE2 Mode] .
For details on the setting value, refer to “GATE1 Polarity” (page 123).