Harmonizer settings, Changing the settings – Pioneer Toraiz SQUID - Creative Multitrack Sequencer User Manual

Page 148

Changing the settings

148

HARMONIZER settings

1 through 6 of the

[HARMONIZER]

buttons can be set with selected

Note

For Harmonizer, refer to “HARMONIZER” (page 71).

1 Hold down the

[SHIFT]

button and press one of the

[HARMONIZER]

buttons.

The display shows the chord type being selected.
The chord of the

[HARMONIZER]

button is shown on the 16-pads.

•

The chord is shown with white lit on the 16-pads.

•

The note on the pad increases by a semitone at a time from the lower-left
root note towards the top right corner in a lateral direction.

2 Turn the rotary selector to select a chord type.

The chord name before the change and the chord name after the change are
shown on the display.

(1) Chord before the change, (2) Chord after the change

•