Pioneer Toraiz SQUID - Creative Multitrack Sequencer - Manual (Page 146)

Changing the settings
146
En
TRACK SETTING
The default setting is shown with *.
 Track Name
Set the Track Name. The Track Name set here is shown on the display
when the 16-pads are in Track mode.
• When the name of the track is set, the track name is shown on the
display in Track mode. When creating a new project, it is set from
Track 01 to Track 16.
• Press the [  ] / [  ] button to move the cursor and turn the rotary
selector to select the character.
• Alphanumeric characters, symbols or blanks are available.
• To delete the character at the cursor, hold down the [SHIFT] button
and press the [BACK] button.
• To insert a blank before the cursor, hold down the [SHIFT] button and
press the rotary selector.
 Mono/Poly
Setting value: Poly*, Mono
Set the monophonic (Mono) or polyphonic (Poly) for the track.
• Poly: Up to 8 notes for each step can be set.
• Mono: Only Note 1 is available for each step.
 Track Speed
Setting value: x0.25, x0.5, x1.0*, x1.5, x2.0
You can set the playback speed of the track. The current track is played
at the magnification of the setting value according to the playback
speed by the set BPM.