Pioneer Toraiz SQUID - Creative Multitrack Sequencer - Manual (Page 31)

Step edit section
31
En
TRACK mode
You can select a track (current track) to operate or edit from 16 tracks.
The relation between the 16-pads and 16 tracks is as follows. (T: Track)
Selecting a track
1 Press the [TRACK] button.
The button lights up in white and the 16-pads switches to Track mode.
• When you are in other modes, you can also switch to Track mode by holding
down the
[TRACK] button. The 16-pads will return to the former state when
released.
2 Press one of the 16-pads.
The corresponding track is loaded as the current track, and the pressed pad
lights up bright in the track color. The other pads light dimly in the track color.
The loaded current track number is shown on the display.
Example: When pressing pad 16
T1 T2 T3 T4
T5 T6 T7 T8
T9 T10 T11 T12
T13 T14 T15 T16