Pioneer Toraiz SQUID - Creative Multitrack Sequencer - Manual (Page 37)

Step edit section
37
En
PATTERN SET mode
You can saves a combination of patterns selected for each track or
load them at once.
Up to 16 pattern sets can be saved in the 16-pads as follow. (PS:
Pattern Set)
Loading a pattern set
1 Hold down the [SHIFT] button and press the [PATTERN] button.
The [PATTERN] button flashes in green and the 16-pads switches to Pattern
Set mode.
• The lighting state changes depending on the state of each pad.
– Lit bright: A pad for the currently loaded pattern set
– Lit dimly: A pad where a pattern set is saved
– Off:
A pad where no pattern set is saved
2 Press one of the 16-pads which is dimly lit.
The pad that is pressed lights up, and the saved pattern set is loaded.
• When you switch the pattern set during playback, the switch is
applied at the first beat of the next bar. The pad flashes in white until
the pattern set is switched.
PS1 PS2 PS3 PS4
PS5 PS6 PS7 PS8
PS9 PS10 PS11 PS12
PS13 PS14 PS15 PS16