Pioneer Toraiz SQUID - Creative Multitrack Sequencer - Manual (Page 138)

Changing the settings
138
En
[Etc] setting
The default setting is shown with *.
 Middle C
Setting value: C3, C4*, C5
Set a pitch name to assign to note number 60.
 Auto Power Off
Setting value: Disable, Enable*
Set Auto Power Off to Disable/Enable.
• For details about Auto Power Off, see “Auto power off function”
(page 7).
 Step Preview
Setting Value: Disable, Enable, Ena(Mute Cur Tr), Ena(Mute All Tr),
Ena(Stop/Pause)
Set MIDI message output of the note information of the pads held down
by Trigger mode or Interpolation.
• Disable: MIDI messages are not output.
• Enable: MIDI messages are output.
• Ena(Mute Cur Tr): MIDI messages are output; however, at the same
time the output of the current track is muted.
• Ena(Mute All Tr): MIDI messages are output; however, at the same
time the output of all tracks are muted.
• Ena(Stop/Pause): MIDI messages are output only when a sequence
is stopped or paused.