Pioneer Toraiz SQUID - Creative Multitrack Sequencer - Manual (Page 56)

Step edit section
56
En
– CV Slide mode
• Basically one pad corresponds to one step; however, you can
change the number of steps counted with one pad by setting the
COUNT value (page 49) for each pad. Also, you can create a pattern
with steps that are not in multiples of 16 by using the functions such
as Active mode (page 66) and Fixed Length (page 79).
• You can modify the resolution of each pad for a pattern. In the default
setting, one pad (one step) is equal to the sixteenth note. For details,
refer to “TRACK settings” (page 145).
Supplemental information: The operations when
changing note information of multiple pads and
parameters of a pad (step) at the same time
The operations differ by the note information to change and the type of
parameters of a pad (step).
 PITCH value
The PITCH values are changed evenly; however, when the maximum
PITCH value reaches note number 127 or the minimum PITCH value
reaches note number 0, you can no longer change the value. As a
result, the PITCH value among multiple pads maintains the same level.