Roland VR-120HD Direct Streaming AV Mixer - Manual (Page 99)

99
Other Functions
Returning to the Factory Settings
(Factory Reset)
Here’s how you can return the settings of the VR-120HD to their
factory-set state.
If following the procedures described in this manual does not cause
the result you expect, try executing a factory reset.
NOTE
¹ When you execute a factory reset, all the settings you’ve made as
well as the data saved on the VR-120HD (preset memory, macros,
sequencer, and still images) is lost.
¹ Do not turn off the power while the message “Processing...” is
shown.
1 . [MENU] button
Ó
“System”
Ó
select “Factory Reset”, and
press the [VALUE] knob.
A confirmation message appears.
* If you decide to cancel, press the [EXIT] button.
2 . Use the [VALUE] knob to select “OK”, and then press the
[VALUE] knob.
Factory reset is executed. When the operation is finished, the message
“Completed” appears.