Roland VR-120HD Direct Streaming AV Mixer - Manual (Page 104)

104
Menu List
3: Video Output
Menu item Value (bold text: default value) Explanation
HDMI Out 1–3 Adjusts the video that is output from the HDMI OUT 1–3 connectors.
Output Status —
Shows the format and an HDCP signal presence. If there is no connection, “Not Connected” is
shown.
Color Space
YPbPr (4: 4: 4) , YPbPr (4: 2: 2),
RGB (0–255), RGB (16–235)
Specifies the color space.
DVI-D/HDMI Signal HDMI , DVI-D Specifies the type of output signal.
Brightness -64– 0 –63 Adjusts the brightness.
Contrast -64– 0 –63 Adjusts the contrast.
Saturation -64– 0 –63 Adjusts the saturation.
Red -64– 0 –63 Adjusts the red level.
Green -64– 0 –63 Adjusts the green level.
Blue -64– 0 –63 Adjusts the blue level.
External Rec Control OFF, ON
Turns the External Rec control on/off. When this is “ON”, REC START/STOP commands can be
sent to a recorder that supports REC control functionality.
To use the External Rec control function, the REC START/STOP functions must be assigned to
the USER button. From the System menu
Ó
“User Assign”
Ó
“User 1”–”User 4” set “Category”
to “External Rec Control”.
SDI Out 1–3 Adjusts the video that is output from the SDI OUT 1–3 connectors.
Output Status —
Shows the format.
* When “HDCP” in the SYSTEM menu is “ON”, “HDCP MASKED” is displayed, and video/audio is
not outputted from the SDI OUT connectors.
3G-SDI Mapping Level-A, Level-B Specifies the mapping structure of the 3G-SDI output.
Brightness -64– 0 –63 Adjusts the brightness.
Contrast -64– 0 –63 Adjusts the contrast.
Saturation -64– 0 –63 Adjusts the saturation.
USB Out
Adjusts the video that is output from the USB STREAM port.
* You can edit the USB output video format and compression method from the livestreaming app or other app used at the output
destination.
Output Status —
Indicates whether the connection uses USB 2.0 (HIGH SPEED) or USB 3.0 (SUPER SPEED). If not
connected to a computer, this indicates “Not Connected”.
* When “HDCP” in the SYSTEM menu is “ON”, “HDCP MASKED” is displayed, and video/audio is
not outputted from the USB STREAM port.
Output Format
Sets the output destination formats that can be selected from the livestreaming app.
YUY2 & MJPEG YUY2 and Motion JPEG are selectable.
YUY2 Only YUY2 is selectable.
Connection Reset Exec
Reconnects the computer and the VR-120HD when the video is garbled or when operation is
otherwise unstable.