Roland VR-120HD Direct Streaming AV Mixer - Manual (Page 141)

141
Menu List
20: Auto Switching
Menu item Value (bold text: default value) Explanation
Jump To Setup Enter Jumps to the setup screen.
Auto Switching OFF , ON
Turns the auto switching function on/off. When this is “ON”, the video or scene memory are
switched automatically.
Type
Specifies the operation mode for auto switching.
Input Scan Automatically switches to the video of Input 1–8 when the specified interval.
Scene Memory Scan
Automatically recalls scene memories 1–32 at the specified interval. The video and audio are
switched according to the settings that are saved in each scene memory.
Beat Sync The video switches in time with the beat of the song.
Video Follows Audio The video switches along with the audio from the mic.
PinP&Key 1–4 Scan Automatically switches to the video of PinP&KEY when the specified interval.
DSK 1, 2 Scan Automatically switches to the video of DSK when the specified interval.
When Type = Input Scan
Scan Sequence
Specifies the order in which video signals are shown.
* If there is no video input, this is skipped.
Normal Switches in the order of Input 1 Ó 8.
Reverse Switches in the order of Input 8 Ó 1.
Random Switches randomly.
Scan Transition Time 0.0– 1 .0 –4.0sec Specifies the video transition time.
Scan Target
Sets the video to which auto switching is applied.
Video Input Final output video and preview video
PinP & Key 1–4 PinP and key layer (inset screen) video
DSK 1–2 DSK and key layer video
Input 1–8 Time Off, 1– 5 –120sec Specifies the time that the video is shown. Turn this “OFF” to skip.
When Type =Scene Memory Scan
Scan Sequence
Specifies the order in which scene memories are switched.
* Scene memories in which no settings have been saved are skipped.
Normal Switches in the order of scene memory 1 Ó 32.
Reverse Switches in the order of scene memory 32 Ó 1.
Random Switches randomly.
Memory 1–32 Time Off, 1– 5 –120sec Specifies the time it takes to switch to the next scene memory. Turn this “OFF” to skip.
When Type =Beat Sync
Sync Source
Audio In 1–Audio In 9/10,
USB In, Bluetooth In, Audio
Player, HDMI 1–6, SDI 1–6,
V.Player
Sets the input audio that’s synchronized with the video.
Scan Sequence
Specifies the order in which video signals are shown.
* If there is no video input, this is skipped.
Normal Switches in the order of Input 1 Ó 8.
Reverse Switches in the order of Input 8 Ó 1.
Random Switches randomly.
Scan Transition Time 0.0– 1 .0 –4.0sec Specifies the video transition time.
Scan Cycle 1– 4 –10 Sets the beat number on which the video switches to the next one.
Scan Target
Video Input , PinP & Key
1–4, DSK 1–2
Sets the video to which auto switching is applied.