Roland VR-120HD Direct Streaming AV Mixer - Manual (Page 51)

51
Audio Operations
Applying Reverb
This adds reverberation to the sound.
Adjusting how much reverb to send
Parameter Explanation
Reverb Send Adjusts the amount of audio sent to reverb.
Adjusting how much reverb is returned
* Adjust how much reverb is returned from the audio effect setup
screen.
1 . Press the AUDIO EFFECT [SETUP] button to turn on (lit).
The Audio Effect Assign setup screen appears.
2 . Press the AUDIO EFFECT [REVERB] button to turn on (lit).
Reverb turns on.
3 . Touch Audio Effect 4 .
The Audio Effect setup screen appears.
4 . Touch the screen to access the settings.
Parameter Explanation
Level
Specifies the amount of sound that is returned from
the reverb (return level). This adjusts the depth of the
overall reverb.
Type
Specifies the reverb type.
Room: Produces the natural-sounding reverberation
of a room.
Hall: Produces the reverberation that is typical of a
performance in a concert hall.
Size
Specifies the size of the room. The larger the value, the
longer the reverb time.
5 . Press the lit [SETUP] button to close the setup screen.