Roland VR-120HD Direct Streaming AV Mixer - Manual (Page 77)

77
Other Functions
Directly recording the panel operations to a macro
You can record the panel operations to a macro, just as you did them.
: Panel operations that can’t be recorded to a macro
1 . In step 4 of “Recording a Macro” (p. 75), bring up the
operation list.
2 . Touch .
The macro recording screen appears.
3 . Operate the controls you want to record.
Each time you operate a control, the operation is added to the list.
* To stop recording, touch .
* Touch to erase all the recorded operations.
4 . Touch to close the screen.
This confirms the operations you’ve recorded.
Executing a Macro
Only for macros 1–8
1 . Press the [MACRO] button.
2 . Press the VIDEO SWITCHER button corresponding to the
number of the macro you wish to execute.
Orange: Macros with a recorded function
Unlit: Macros without a recorded function
This executes the macro.
Macro 1–100
1 . Press the [MACRO] button.
2 . Press the MODE [SETUP] button.
3 . Touch .
This shows the macro execution screen.
4 . Touch the macro (1–100) you want to execute.
Macro number selector Edit/execute switch Macro selection
This executes the macro.
MEMO
Assigning macros to the VIDEO SWITCHER buttons
You can change which macros are assigned to each VIDEO SWITCHER
button.
Press the [MENU] button and select “Macro”
Ó
“Button Assign” and
then the menu items listed below to assign macros (1–100) to the
respective VIDEO SWITCHER buttons.