Roland VR-120HD Direct Streaming AV Mixer - Manual (Page 140)

140
Menu List
17: Still Image
Menu item
Value (bold text: default
value)
Explanation
Load From Storage This loads a still image from the storage media.
Still Image Still 1 –16
Specifies where to save still images imported from a storage to this unit’s internal memory.
* A “ ” symbol is displayed for internal memory where a still image is already saved.
Load Enter
Shows a list of still image files on the storage media.
Select still images in the list to load them from the storage media.
Formats supported for loading
Format
Bitmap file (.bmp), 24-bit color, uncompressed
PNG file (.png), 24-bit color
* Alpha channel supported
JPEG file (.jpg), 24-bit color
Resolution In conformity with system format
File name
No more than 64 single-byte alphanumeric characters
* The extension “.bmp”, “.png”, “.
jpg ”, or “. jpeg” must be added.
Save To Storage This exports a still image to storage media.
Still Image Still 1 –16
Selects the still images to export to the USB flash drive.
Press the [VALUE] knob to display a list of still images stored on the storage media (in the “Still”
subdirectory).
* A “ ” symbol is displayed for internal memory where a still image is already saved.
* The file formats of the still images that can be saved are the same as in “Formats supported
for loading”, above.
* You can’t export still images that were created while “HDCP” in the System menu was “ON”.
* When “HDCP” in the System menu is “ON”, the text “, (HDCP)” is shown for the captured still
image.
Save Enter
Shows a list of still image files on the storage media.
Select still images in the list to export them to the storage media.
Save To Internal Storage Enable , Disable
You can set the method of saving still images to “temporarily save”. When you turn off the
power while the status is “Disable”, the captured still image is deleted.
Delete Still Image Deletes the still image.
Still Image All, Still 1 –16
Selects the still images to delete.
* A “ ” symbol is displayed for internal memory where a still image is already saved.
Delete Exec Deletes the selected still image(s).
18: Video Player
Menu item Value (bold text: default value) Explanation
Jump To Setup Enter Jumps to the setup screen.
Import Enter Loads a video from the storage media.
Name — Shows the filename of the video that was loaded.
Duration Display only Shows the length of the video that was loaded.
Skip Forward Time 0 .0 –5.0sec Sets how much the video fast-forwards each time.
Skip Backward Time 0 .0 –5.0sec Sets how much the video rewinds each time.
Level -INF– 0 .0 –10.0dB Adjusts the output volume.
Repeat OFF , ON When this is “ON”, the video plays back repeatedly.
19: Freeze
Menu item Value (bold text: default value) Explanation
Jump To Setup Enter Jumps to the setup screen.
Freeze OFF , ON Turns the freeze function on/off. When this is “ON”, the input video is temporarily frozen.
Type
Specifies the operation mode for freezes.
All Freezes all video that is being input.
Select Freezes only the specified input video.
HDMI 1–6 (*14) Disable, Enable For each input, specifies whether the freeze function is enabled (Enable) or disabled
(Disable). SDI 1–6 (*14) Disable, Enable
(*14) This can be set if “Type” is “Select”.