Roland VR-120HD Direct Streaming AV Mixer - Manual (Page 81)

81
Other Functions
Loading
Here’s how to load the macro settings that are saved on a storage.
Loading the settings overwrites the current settings for the macros
(1–100).
1 . Insert the SD card into the SDXC card slot.
* When using a USB flash drive, connect the USB flash drive to the USB
HOST port.
2 . [MENU] button
Ó
“Macro”
Ó
select “Load From Storage”,
and press the [VALUE] knob.
The macro setting files in the storage are listed.
* Use the “SD Card” or “USB Memory” selector at the top right-hand
corner of the screen to switch between the storage media to load
from.
3 . Touch the macro settings file that you want to recall.
A confirmation message appears.
* If you decide to cancel, press the [EXIT] button.
4 . Use the [VALUE] knob to select “OK”, and then press the
[VALUE] knob.
The macro settings are loaded. When the operation is finished, the
message “Completed” appears.
5 . Press the [MENU] button to close the menu.
Initializing All Macros
Here’s how to initialize and erase all the macros.
1 . [MENU] button
Ó
“Macro”
Ó
select “Initialize”, and press
the [VALUE] knob.
A confirmation message appears.
* If you decide to cancel, press the [EXIT] button.
2 . Use the [VALUE] knob to select “OK”, and then press the
[VALUE] knob.
The macros are initialized.
3 . Press the [MENU] button to close the menu.