Roland VR-120HD Direct Streaming AV Mixer - Manual (Page 105)

105
Menu List
4: Transition
Menu item Value (bold text: default value) Explanation
Mix These are the detailed mix settings.
Jump To Setup Enter Jumps to the setup screen.
Mix Type
Specifies the transition pattern for mix.
Mix The two videos are mixed as the transition occurs.
Fam
Video transitions are made with the luminance levels of the two video streams maintained
unchanged. This is an abbreviation of “full additive mix”.
Nam
The two video streams are compared, and transitions are made with display during
transition starting with levels of high luminance. This is an abbreviation of “non-additive
mix”.
Mix Time 0.0– 1 .0 –4.0sec Specifies the video transition time.
Wipe These are the detailed wipe settings.
Jump To Setup Enter Jumps to the setup screen.
Wipe Type
Specifies the transition pattern for wipe.
Horizontal Vertical Upper Left Upper Right Lower Left Lower Right H-Center V-Center
Wipe Time 0.0– 1 .0 –4.0sec Specifies the video transition time.
Direction Normal , Reverse, Round Trip Specifies the direction of wipe.
Border Color
White , Yellow, Cyan, Green, Magenta,
Red, Blue, Black, Soft Edge
Specifies the color of the border added to the edge of the wipe area.
When this is set to “Soft Edge”, the wipe border is blurred.
Border Width 0– 3 –14 Specifies the width of the border added to the edge of the wipe area.
Split 1, 2 These are the detailed settings for the split composite.
Jump To Setup Enter Jumps to the setup screen.
Split Type
These parameters configure the split screen layout.
Split V
This vertically crops the center section of the video (split left/right).
This is the default setting for “Split 1”.
A B A B
A B
B
A
Split H
This horizontally crops the center section of the video (split upper/lower).
This is the default setting for “Split 2”.
A B A B
A B
B
A
PGM Source
HDMI 1–6, SDI 1–6, Still 1–16,
V.Player, Input 1 –8
Selects the video source to display on the left or upper side.
PST Source
HDMI 1–6, SDI 1–6, Still 1–16,
V.Player, Input 1, Input 2 –8
Selects the video source to display on the left or upper side.
PGM Center -50.0– 0 .0 –50.0%
When at SPLIT V
Adjusts the horizontal position of the video placed on the left.
When at SPLIT H
Adjusts the horizontal position of the video placed above.
* This positions the PGM bus video to the left or upper side.
PST Center -50.0– 0 .0 –50.0%
When at SPLIT V
Adjusts the horizontal position of the video placed on the right.
When at SPLIT H
Adjusts the horizontal position of the video placed below.
* This positions the PST bus video to the right or lower side.
Center Position -50.0– 0 .0 –50.0% Adjusts the position of the boundary.
Border Color
White , Yellow, Cyan, Green, Magenta,
Red, Blue, Black
Specifies the color of the border.
Border Width 0– 3 –14 Adjusts the width of the border.