Roland VR-120HD Direct Streaming AV Mixer - Manual (Page 138)

138
Menu List
14: Scene Memory
Menu item
Value (bold text: default
value)
Explanation
Jump To Setup Enter Jumps to the setup screen.
Start Up
Specifies the settings loaded at startup.
Last Memory
Restores the state that was in effect immediately before the power was turned off (Last Memory
feature).
The current settings (Last Memory values) are saved every 4 seconds, and when you exit a menu.
1: MEMORY 1–
32: MEMORY 32 (*12)
Recall the settings at the selected scene memory.
Priority Memory , Panel Sets whether to give the scene memory or the panel state priority.
Memory Protect OFF , ON
When this is “ON”, prohibits settings from being saved or initialized. This protects the scene memories.
* Protected scene memories are erased if you perform a factory reset.
Load From Storage Enter
Shows a list of scene memory setting files (.VR120SCENE) on the storage media.
You can select a scene memory setting file to recall a scene memory (1–32) on this unit.
Save To Storage Enter
Shows a list of scene memory setting files (.VR120SCENE) on the storage media.
You can select a scene memory setting file to save a scene memory (1–32) to the storage media.
Button Assign Enter This shows the Button Assign menu.
VIDEO SWITCHER Button
1–8
1: MEMORY 1–
32: MEMORY 32 (*12)
The default values are as
follows.
1:
MEMORY 1
2: MEMORY 2
3: MEMORY 3
4: MEMORY 4
5: MEMORY 5
6: MEMORY 6
7: MEMORY 7
8: MEMORY 8
Selects the scene memories that are assigned to the VIDEO SWITCHER buttons.
Fade Time 0 .0 –4.0sec
Sets how long the transition to the next video takes when recalling a scene memory.
* The time you set is used for the parameters below.
Mix/Wipe OFF, ON When this is “ON”, the transition effect is applied when the scene memory is recalled.
PinP & Key 1–4 OFF, ON
When this is “ON”, the inset screen fades in when you recall a scene memory that includes a PinP
composite.
DSK 1, 2 OFF, ON
When this is “ON”, the superimposed caption and video fades in when you recall a scene memory
that includes a DSK composite.
Load Parameters
Specifies whether to recall the following items when recalling a scene memory.
Items that are turned off are excluded from the preset memories that are recalled.
Video Assign OFF, ON Video Assign menu
Video Input OFF, ON Video Input menu
Video Output OFF, ON Video Output menu
Transition Transition settings
Transition Type OFF, ON Transition menu
Mix OFF, ON Mix menu
Wipe OFF, ON Wipe menu
Split 1 OFF, ON Split 1 menu
Split 2 OFF, ON Split 2 menu
PinP & Key PinP & settings
PinP & Key 1 OFF, ON PinP & Key 1 menu
PinP & Key 2 OFF, ON PinP & Key 2 menu
PinP & Key 3 OFF, ON PinP & Key 3 menu
PinP & Key 4 OFF, ON PinP & Key 4 menu
DSK DSK settings
DSK 1 OFF, ON DSK 1 menu
DSK 2 OFF, ON DSK 2 menu
Video Switcher Button OFF, ON VIDEO SWITCHER button state
Audio Fader Assign OFF , ON Audio Fader Assign menu
Audio Input OFF , ON Audio Input menu
Audio Output OFF , ON Audio Output menu
Audio Follow OFF , ON Audio Follow menu
Audio Auto Mixing OFF , ON Audio Auto Mixing menu
(*12) If you edited a scene memory’s name using “Name Edit” from the setup screen, the edited name is shown.