Roland A-88MKII MIDI Keyboard Controller User Manual
Owner’s manual (this document), Pdf manual (download from the web)
Owner’s Manual (this document)
Read this first. This explains basic operation.
PDF Manual (download from the Web)
5
A-88MKII Control Manual (English)
This explains A-88MKII Control.
To obtain the PDF manual
1.
Enter the following URL in your
computer.
http://www.roland.com/manuals/
I
2.
Choose
“A-88MKII.”
Owner’s Manual
Before using this unit, carefully read “USING THE UNIT SAFELY” (p. 15) and “IMPORTANT NOTES” (p. 16). After reading, keep the document(s) where it will be available for
immediate reference.
© 2019 Roland Corporation
This manual is related to the following products:
- SP-404MKII Creative Sampler and Effector Aerophone Mini Digital Wind Instrument KD-10 Kick Pad V-1HD+ Compact 4 x HDMI Video Switcher & UVC-01 USB Capture Device Kit V-1HD Portable 4 x HDMI Input Switcher VC-1-DMX Video Lighting Converter V-1HD+ Compact 4 x HDMI Video Switcher V-Drums Electronic Drum Set GO:PIANO 61-Key Touch-Sensitive Portable Keyboard RP107 88-Key Digital Piano (Black) F107 88-Key Digital Piano (Black) VC-1-SC Up/Down/Cross Scan Converter VC-1-SH SDI to HDMI Video Converter VC-1-DL Bi-Directional SDI/HDMI Video Converter with Delay and Frame Sync VC-1-HS HDMI to SDI Video Converter Blues Cube Hot 30W 1x12" Guitar Combo Amplifier (Vintage Blonde) V-60HD Multi-Format HD Video Switcher V-60HD Multi-Format HD Video Switcher and UVC-01 USB Video Capture Kit
Table of contents
Document Outline
- Introduction
- Main Specifications
- Panel Descriptions
- Restoring the Factory Settings (FACTORY RESET)
- Overview of the A-88MKII
- Zone Settings (FUNCTION)
- Playing
- Saving the Settings (SNAP SHOT)
- System Settings (FUNCTION)
- Specifying the Keyboard Velocity Values (KEY VELO)
- Preventing Suspend When USB-Connected (NO SUSPEND)
- Selecting the USB Driver (DRIVER)
- Setting the Operation of the Pedal (CTRL DIR)
- Switching the Operation of the Pads (Latch/Momentary)
- Assigning a Controller Number to a Knob
- Using Pedals to Modify the Sound
- Assigning a Program Change Message to a Pad (PROG CHG)
- Assigning a Control Change Message to a Pad (CC)
- Assigning Note Messages to Pads (NOTE)
- Halting Stuck Notes (PANIC)
- USING THE UNIT SAFELY
- IMPORTANT NOTES