Roland VR-120HD Direct Streaming AV Mixer - Manual (Page 135)

135
Menu List
Menu item Value (bold text: default value) Explanation
Phones Out/Monitor Adjusts the audio that is output from the PHONES jack.
Phones Level -INF –10.0dB
Adjusts the output volume.
This can also be adjusted by the [PHONES] knob.
Monitor Level -INF –10.0dB Adjust the monitor volume.
USB Out Adjusts the audio that’s output from the USB STREAM port.
Jump To Setup Enter Jumps to the setup screen.
Level -INF– 0 .0 –10.0dB
Adjusts the output volume.
This can also be adjusted by the [USB OUT] knob.
Mute OFF , ON Turns the mute function on/off. When this is “ON”, the input audio is temporarily silenced.
Delay
0 .0 –500msec
(0 –25.0/29.9/30.0frame)
Adjusts the delay time of the audio.
Effect Outputs audio with a delay.
Equalizer OFF , ON
Turns the equalizer on/off.
Effect
This is a 4-band parametric equalizer. It lets you shape the character of the sound by boosting
or cutting four frequency regions.
Hi Gain -12.0– 0 .0 –12.0dB Boosts or attenuates the high band.
Hi Freq 1.00– 10 .0 –20.0kHz Adjusts the center frequency when changing the tone quality in the high band.
Hi-Mid Gain -12.0– 0 .0 –12.0dB Boosts or attenuates the high-midrange band.
Hi-Mid Freq 20.0Hz– 2 .00kHz –20.0kHz Adjusts the center frequency when changing the tone quality in the high-midrange band.
Hi-Mid Q 0.5– 1 .0 –16.0
Adjusts the width of the frequency band when boosting or attenuating high-midrange
band.
Lo-Mid Gain -12.0– 0 .0 –12.0dB Boosts or attenuates the low-midrange band.
Lo-Mid Freq 20.0Hz– 500Hz –20.0kHz Adjusts the center frequency when changing the tone quality in the low-midrange band.
Lo-Mid Q 0.5– 1 .0 –16.0 Adjusts the width of the frequency band when boosting or attenuating low-midrange band.
Lo Gain -12.0– 0 .0 –12.0dB Boosts or attenuates the low band.
Lo Freq 20.0Hz– 100Hz –2.00kHz Adjusts the center frequency when changing the tone quality in the low band.
Stream/Record Adjusts the audio that’s output from the DIRECT STREAM port.
Jump To Setup Enter Jumps to the setup screen.
Level -INF– 0 .0 –10.0dB
Adjusts the output volume.
This can also be adjusted by the [STREAM/RECORD] knob.
Mute OFF , ON Turns the mute function on/off. When this is “ON”, the input audio is temporarily silenced.
Delay
0 .0 –500msec
(0 –25.0/29.9/30.0frame)
Adjusts the delay time of the audio.
Effect Outputs audio with a delay.
Equalizer OFF , ON
Turns the equalizer on/off.
Effect
This is a 4-band parametric equalizer. It lets you shape the character of the sound by boosting
or cutting four frequency regions.
Hi Gain -12.0– 0 .0 –12.0dB Boosts or attenuates the high band.
Hi Freq 1.00– 10 .0 –20.0kHz Adjusts the center frequency when changing the tone quality in the high band.
Hi-Mid Gain -12.0– 0 .0 –12.0dB Boosts or attenuates the high-midrange band.
Hi-Mid Freq 20.0Hz– 2 .00kHz –20.0kHz Adjusts the center frequency when changing the tone quality in the high-midrange band.
Hi-Mid Q 0.5– 1 .0 –16.0
Adjusts the width of the frequency band when boosting or attenuating high-midrange
band.
Lo-Mid Gain -12.0– 0 .0 –12.0dB Boosts or attenuates the low-midrange band.
Lo-Mid Freq 20.0Hz– 500Hz –20.0kHz Adjusts the center frequency when changing the tone quality in the low-midrange band.
Lo-Mid Q 0.5– 1 .0 –16.0 Adjusts the width of the frequency band when boosting or attenuating low-midrange band.
Lo Gain -12.0– 0 .0 –12.0dB Boosts or attenuates the low band.
Lo Freq 20.0Hz– 100Hz –2.00kHz Adjusts the center frequency when changing the tone quality in the low band.
HDMI/SDI Audio Embedded Settings related to embedded audio for the HDMI/SDI output.
HDMI Out 1-3 Send These parameters set the input audio to send to HDMI embedded audio channels 3–8.
Channel 3/4
N/A , Audio In 1/2–Audio In 9/10,
USB In, Bluetooth In, Audio Player,
HDMI 1–6, SDI 1–6, Video Player
When this is set to “N/A”, no audio is sent.
* The following audio buses are assigned for channels 1 and 2.
Channel 1: Main Bus (L) or AUX 1 Bus (L)
Channel 2: Main Bus (R) or AUX 2 Bus (R)
Channel 5/6
Channel 7/8
SDI Out 1-3 Send These parameters set the input audio to send to SDI embedded audio channels 3–8.
Channel 3/4
N/A , Audio In 1/2–Audio In 9/10,
USB In, Bluetooth In, Audio Player,
HDMI 1–6, SDI 1–6, Video Player
When this is set to “N/A”, no audio is sent.
* The following audio buses are assigned for channels 1 and 2.
Channel 1: Main Bus (L) or AUX 1 Bus (L)
Channel 2: Main Bus (R) or AUX 2 Bus (R)
Channel 5/6
Channel 7/8