Applying effects to input audio, Audio operations – Roland VR-120HD Direct Streaming AV Mixer User Manual
Page 48
48
Audio Operations
Applying Effects to Input Audio
You can apply effects to the input audio to adjust the character of the sound. The following table shows the effects that are available.
Input audio
High-pass
filter
Echo
canceller
Anti-
feedback
Noise gate
De-esser
Compressor
Equalizer
Voice
changer
Delay
Reverb
Audio In 1, 2
µ
µ
µ
µ
µ
µ
µ
µ
µ
µ
Audio In 3–6
µ
—
—
µ
µ
µ
µ
—
µ
µ
Audio In 7/8–9/10
µ
—
—
µ
—
µ
µ
—
µ
µ
USB In
µ
—
—
µ
—
µ
µ
—
µ
µ
Bluetooth In
µ
—
—
µ
—
µ
µ
—
µ
µ
HDMI In, SDI In
µ
—
—
µ
—
µ
µ
—
µ
µ
Audio Player,
Video Player
µ
—
—
µ
—
µ
µ
—
µ
µ
1 .
Press the [SETUP] button for the channel to which you wish
to apply effects.
The setup screen for the channel you pressed appears.
2 .
Touch the screen to configure the effects.
* The settings screen for the high-pass filter, compressor, equalizer and
noise gate is on page 2.
* For details on the parameters, refer to “8: Audio Input” (p. 110).
3 .
Press the lit [SETUP] button to close the setup screen.
Á
High-pass filter
Cuts off unneeded low-band audio. The cutoff frequency is 80
Hz.
Á
Echo canceller (p. 50)
Suppresses the voice echo that can occur when using a web
conferencing system that includes a speaker and mic.
Á
Anti-feedback (p. 50)
Suppresses audio feedback.
Á
Noise gate
Eliminates audio that is lower than the specified threshold
level. This is effective when the noise that you want to remove
is separate from the audio that you want to keep, and can be
used to remove hiss or other noise that is heard during periods
of silence.
Á
De-esser
Reduces sibilant noise (the sounds you hear when pronouncing
“s” words and other hissing sounds).
Á
Compressor
Audio that exceeds the specified threshold level is compressed.
This reduces the difference between the maximum volume
and minimum volume, making the audio more comfortable for
listening.
Á
Equalizer
This is a four-band equalizer. It lets you adjust the volume by
boosting or cutting four frequency regions.
Á
Transforms the pitch or character of the voice.
Á
Delay (p. 50)
Outputs audio with a delay.
Á
Reverb (p. 51)
Adds reverberation to the sound.