PLANET WNAP-1110 - Manual (Page 87)

User’s Manual of WNAP-1110
-87-
The current configuration will be covered by the uploading configuration file. The upgrade
process lasts for 20 seconds and the AP will restart automatically. Keep the AP power on
during the upgrading process to prevent any damage.
5.8.8 Reboot
Choose menu “System Tools → Reboot”, and you can click the Reboot button to reboot the AP via the next
screen.
Figure 5-67 Reboot the AP
Some settings of the AP will take effect only after rebooting, which include
Change the LAN IP Address (system will reboot automatically).
Change the DHCP Settings.
Change the Wireless configurations.
Upgrade the firmware of the AP (system will reboot automatically).
Restore the AP's settings to factory defaults (system will reboot automatically).
Update the configuration with the file (system will reboot automatically.
5.8.9 Password
Choose menu “System Tools → Password”, and you can change the factory default user name and
password of the AP in the next screen as shown in Figure 5-68.