PLANET WNAP-1110 - Manual (Page 34)

User’s Manual of WNAP-1110
-34-
Step 2. Select the Most Secure (WPA/WPA2-PSK) encryption mode and enter a password below to prevent
unauthorized access to your AP.
Step 3. Click Next and you will then come to the Network Setting page for further configuration.
Step 4. Refer to Step 5 of Chapter 4.2 to continue the setting. Then, refer to Chapter 6 to quickly connect to a
wireless Network.
5.3.2 Operation Mode – Multi-SSID
Choose menu “Quick Setup → Next → Multi-SSID” , or “Operation Mode → Multi-SSID” to configure the
device as a general wireless access point with multiple SSIDs.
Figure 5-6 Operation Mode – Multi-SSID
The page includes the following fields:
Object Description
Enable VLAN Check this box and then you can change the VLAN ID of each SSID. If you want
to configure the Guest and Internal networks on VLAN, the switch you are using
must support VLAN. As a prerequisite step, configure a port on the switch for
handling VLAN tagged packets as described in the IEEE802.1Q standard, and
enable this field.
SSID (1-4) Up to 4 SSIDs for each BSS can be entered in the field like SSID1 ~ SSID4. The
name can be up to 32 characters. The same name (SSID) must be assigned to
all wireless devices in your network. If Enable VLAN is checked, the wireless
stations connecting to SSID of a different VLANID cannot communicate with each