PLANET WNAP-1110 - Manual (Page 72)

User’s Manual of WNAP-1110
-72-
You cannot change any of the values on this page. To update this page and to show the current connected
wireless stations, click on the Refresh button.
If the numbers of connected wireless stations go beyond one page, click the Next button to go to the next page
and click the Previous button to return to the previous page.
This page will be refreshed automatically every 5 seconds.
5.7 DHCP
There are three submenus under the DHCP menu (shown in Figure 5-52): DHCP Settings, DHCP Clients List
and Address Reservation. Click any of them, and you will be able to configure the corresponding function.
Figure 5-52 The DHCP menu
5.7.1 DHCP Settings
Choose menu “DHCP→DHCP Settings” and you can configure the DHCP Server on the page (shown in
Figure 5-53).The AP is set up by default as a DHCP (Dynamic Host Configuration Protocol) server, which
provides the TCP/IP configuration for all the PC(s) that are connected to the AP on the LAN.