PLANET WNAP-1110 - Manual (Page 49)

User’s Manual of WNAP-1110
-49-
5.3.5 Operation Mode – Client
Choose menu “Quick Setup → Next → Client”, or “Operation Mode → Client” to configure the device as a
general wireless access point with multiple SSIDs.
In this mode, the product can extend the coverage of another wireless Access Point or Router. The universal
repeater mode is for the wireless Access Point or Router which does not support WDS function.
Figure 5-26 Wireless - Client
The page includes the following fields:
Object Description
Wireless Name of Root
AP
The SSID of the AP your device is going to connect to as a client. You can also
use the search function to select the SSID to join.
MAC Address of Root
AP
The BSSID of the AP your device is going to connect to as a client. You can also
use the search function to select the BSSID to join.
Survey Click Survey button, you can search the AP which runs in the current channel.
Region Select your region from the pull-down list. This field specifies the region where
the wireless function of the AP can be used. It may be illegal to use the wireless
function of the AP in a region other than one of those specified in this filed. If your
country or region is not listed, please contact your local government agency for
assistance.
Channel Width The bandwidth of the wireless channel.
Enable Wireless Radio The wireless radio of the AP can be enabled or disabled to allow or deny wireless