PLANET WNAP-1110 - Manual (Page 45)

User’s Manual of WNAP-1110
-45-
Figure 5-20 Operation Mode - Bridge with AP
The page includes the following fields:
Object Description
Wireless Name of
Remote AP
The SSID of the AP your device is going to connect to as a client. You can also
use the search function to select the SSID to join.
MAC Address of
Remote AP
The BSSID of the AP your device is going to connect to as a client. You can also
use the search function to select the BSSID to join.
Survey Click Survey button, you can search the AP which runs in the current channel.
Key type This option should be chosen according to the AP's security configuration. It is
recommended that the security type is the same as your AP's security type
Password If the AP your device is going to connect needs password, you need to fill the
password in this blank.
Local Wireless Name Enter a value of up to 32 characters. The same Name (SSID) must be assigned
to all wireless devices in your network.
Region Select your region from the pull-down list. This field specifies the region where
the wireless function of the AP can be used. It may be illegal to use the wireless
function of the AP in a region other than one of those specified in this filed. If your
country or region is not listed, please contact your local government agency for
assistance.
Channel This field determines which operating frequency will be used. It is not necessary
to change the wireless channel unless you notice interference problems with
another nearby access point.