beautypg.com

3 operation mode – repeater (range extender), Operation mode – repeater (range extender), Igure – PLANET WNAP-1110 User Manual

Page 38: Ulti, Ssid, Vlan, Opology

background image

User’s Manual of WNAP-1110

-38-

the LAN port equal to the PVID of port 5.

3. Verifying the communication status after the above configuration is completed.

Step 1. If VLAN ID of the PC connected to the switch is different from the VLAN ID of the wireless STA, the

two cannot communicate with each other, for example, PC1 and STA2.

Step 2. If the PC connected to the switch and the wireless STA have the same VLAN ID, the two can

communicate with each other, for example, PC2 and STA2.

Figure 5-9 Multi-SSID – VLAN Topology

If the LAN port of the WNAP-1110 is not connected to a switch but directly to a PC,

1.

The PC can directly log on to the Web management page of the WNAP-1110 and manage
the access point.

2.

Only the wireless STA with its VLAN ID set to 1 can communicate with the wired PC.

5.3.3 Operation Mode – Repeater (Range Extender)

Choose menu “Quick Setup → Next → Repeater (Range Extender)”, or “Operation Mode → Repeater
(Range Extender)
” to configure the device as a general wireless access point with multiple SSIDs.