PLANET WNAP-1110 - Manual (Page 86)

User’s Manual of WNAP-1110
-86-
Figure 5-65 Restore Factory Default
Click the Restore button to reset all configuration settings to their default values.
Default IP Address: 192.168.1.253
Default User Name: admin
Default Password: admin
Default SSID: WNAP-1110
Default Wireless Password: PIN code (refer to the label on the bottom of the WNAP-1110.)
Any settings you have saved will be lost when the default settings are restored.
5.8.7 Backup & Restore
Choose menu “System Tools → Backup & Restore”, and you can save the current configuration of the AP as
a backup file and restore the configuration via a backup file as shown in Figure 5-66.
Figure 5-66 Backup & Restore Configuration
Click the Backup button to save all configuration settings as a backup file in your local computer.
To restore the AP's configuration, follow these instructions.
Step 1. Click the Browse… button to locate the update file for the AP, or enter the exact path to the
Setting file in the text box.
Step 2. Click the Restore button.