PLANET WNAP-1110 - Manual (Page 84)

User’s Manual of WNAP-1110
-84-
5.8.4 Ping Watch Dog
Choose menu “System Tools → Ping Watch Dog” to allow you to continuously monitor the particular
connection between the AP to a remote host. It makes this AP continuously ping a user defined IP address (it
can be the Internet gateway, for example). If it is unable to ping under the user defined constraints, this device
will automatically reboot.
Figure 5-63 Ping Watch Dog
The page includes the following fields:
Object Description
Enable Turn on/off Ping Watch Dog.
IP Address
The IP address of the target host where the Ping Watch Dog Utility is sending
ping packets.
Interval Time interval between two ping packets which are sent out continuously.
Delay Time delay before first ping packet is sent out when the device is restarted.
Fail Count Upper limit of the ping packet the device can drop continuously. If this value is
overrun, the device will restart automatically.
5.8.5 Firmware Upgrade
Choose menu “System Tools → Firmware Upgrade”, and you can update the latest version of firmware for
the AP in the following screen.