PLANET WNAP-1110 - Manual (Page 63)

User’s Manual of WNAP-1110
-63-
Radius Server IP Enter the IP address of the Radius Server.
Radius Port Enter the port that radius service used.
Radius Password Enter the password for the Radius Server.
Group Key Update
Period
Specify the group key update interval in seconds. The value should be 30 or
above. Enter 0 to disable the update.
If you check the WPA/WPA2 radio button and choose TKIP encryption, you will find a notice in red
as shown in Figure 5-43.
C. WPA/WPA2 – Personal
Figure 5-44 Wireless Security - WPA/WPA2 Personal
The page includes the following fields:
Object Description
WPA-PSK/WPA2-PSK It’s the WPA/WPA2 authentication type based on pre-shared passphrase.
Version You can choose the version of the WPA-PSK security on the drop-down list. The
default setting is Automatic, which can select WPA-PSK (Pre-shared key of
WPA) or WPA2-PSK (Pre-shared key of WPA) automatically based on the
wireless station's capability and request.
Encryption When WPA-PSK or WPA is set as the Authentication Type, you can select either
Automatic, or TKIP or AES as Encryption.
PSK Password You can enter ASCII characters between 8 and 63 characters or 8 to 64
Hexadecimal characters.
Group Key Update
Period
Specify the group key update interval in seconds. The value should be 30 or
above. Enter 0 to disable the update.