2 the rear panel, The rear panel, Igure – PLANET WNAP-1110 User Manual
Page 15: Wnap-1110, Anel
User’s Manual of WNAP-1110
-15-
Flash
The Wireless function is enabled
WLAN
Green
Off
The Wireless function is disabled
On
A wireless device has been successfully added to the network by
WPS
function.
Slow Flash
A wireless device is connecting to the network by
WPS
function.
This process will last in the first 2 minutes.
WPS
Green
Quick Flash
A wireless device failed to be added to the network by
WPS
function.
2.1.2 The Rear Panel
The rear panel of the WNAP-1110 consists of buttons, connection port, and power connector.
Figure 2-2
shows
the hardware interface of WNAP-1110.
Rear Panel
Figure 2-2 WNAP-1110 Rear Panel
Button definition
Object
Description
WPS
Press the button for less than 3 seconds for WPS configuration.
Power ON/OFF
Press the button to power on the device.
Reset
Press and hold the button for about 5 seconds to the factory default setting.
4dBi Antenna
10/100Mbps LAN Port
Reset Button
(Press and hold the Reset button for
about 5 seconds for factory default)
Power ON/OFF Button
Power Connector
9V DC Input
POWER
ON/OFF
LAN
Reset