PLANET WNAP-1110 - Manual (Page 78)

User’s Manual of WNAP-1110
-78-
Figure 5-59 The System Tools menu
The page includes the following fields:
Object Description
SNMP Agent
Select the radio button before Enable will enable this function if you want to
have remote control through SNMPv1/v2 agent with MIB-II. Select the radio
button before Disable will disable this function. The default setting is Disable.
SysContact The textual identification of the contact person for this managed node.
SysName An administratively-assigned name for this managed node.
SysLocation The physical location of this node.
Get Community
Enter the community name that allows Read-Only access to the AP's SNMP
information. The community name can be considered a group password. The
default setting is “public”.
Get Source
Get source defines the IP address or subnet for management systems that can
read information from this 'get' community device.
Set Community
Enter the community name that allows Read/Write access to the AP's SNMP
information. The community name can be considered a group password. The
default setting is “private”.
Set Source
Set source defines the IP address or subnet for management systems that can
control this 'set' community device.