PLANET WNAP-1110 - Manual (Page 32)

User’s Manual of WNAP-1110
-32-
The page includes the following fields:
Object Description
AP In this mode, the device will act as a wireless central hub for your wireless LAN
clients, giving a wireless extension for your current wired network.
Multi-SSID In this mode, the device can create up to 4 wireless networks labeled with
different SSIDs and assign each SSID with different security or VLAN, especially
for the situation when the various access policies and functions are required.
Repeater(Range
Extender)
In this mode, the device can copy and reinforce the existing wireless signal to
extend the coverage of the signal, especially for a large space to eliminate
signal-blind corners.
Bridge with AP In this mode, the device can be used to combine multiple local networks together
to the same one via wireless connections, especially for a home or office where
separated networks can't be connected easily together with a cable.
Client In this mode, the device can be connected to another device via Ethernet port
and act as an adaptor to grant your wired devices access to a wireless network,
especially for a Smart TV, Media Player, or game console only with an Ethernet
port.
Be sure to click the Save button to save your settings on this page.
The device will reboot automatically after you click the Save button.
When you change the operation mode to Client/Repeater, WPS function will stay disabled.
Please manually enable this function if needed when you switch back to Access
Point/Multi-SSID/Bridge mode.
5.3.1 Operation Mode – Access Point
Choose menu “Quick Setup → Next → Access Point ”, or “Operation Mode → Access Point” to configure
the device as a general wireless access point.