PLANET WNAP-1110 - Manual (Page 85)

User’s Manual of WNAP-1110
-85-
Figure 5-64 Firmware Upgrade
The page includes the following fields:
Object Description
Firmware Version This displays the current firmware version.
Hardware Version This displays the current hardware version. The hardware version of the
upgrade file must accord with the AP’s current hardware version.
To upgrade the AP's firmware, follow these instructions below:
Step 1. Download a more recent firmware upgrade file from the Planet website
Step 2. Type the path and file name of the update file into the File field. Or click the Browse… button to
locate the update file.
Step 3. Click the Upgrade button.
New firmware versions posted on the website of PLANET Technology can be downloaded for
free. There is no need to upgrade the firmware unless the new firmware has a new feature
you want to use. However, when experiencing problems caused by the AP rather than the
configuration, you can try to upgrade the firmware.
When you upgrade the AP's firmware, you may lose its current configurations, so before
upgrading the firmware please write down some of your customized settings to avoid losing
important settings.
Do not turn off the AP or press the Reset button while the firmware is being upgraded;
otherwise, the AP may be damaged.
The AP will reboot after the upgrading has been finished.
5.8.6 Factory Defaults
Choose menu “System Tools → Factory Defaults”, and you can restore the configurations of the AP to
factory defaults in the following screen