PLANET WNAP-1110 - Manual (Page 12)

User’s Manual of WNAP-1110
-12-
1.4 Product Specifications
Product
WNAP-1110
150Mbps 802.11n Wireless Range Extender
Hardware Specifications
Interface PoE LAN Port:
1 x 10/100Mbps Auto MDI/MDI-X RJ45 port
※ Passive PoE/PD Port
PoE Passive PoE (Up to 30 meters)
Antenna Detachable 4dBi antenna x1
WPS Button Press the WPS button on the front panel of the device.
Button
Reset Button Press for about 5 seconds to reset the device to factory default.
LED Indicators PWR/SYS/LAN/WLAN/WPS LED
Material Plastic
Dimensions (W x D x H) 174 x 110 x 23 mm
Weight 250g
Power Requirements 9V DC, 0.85A or Passive PoE
Power Consumption 2W (max.)
Wireless interface Specifications
Standard Compliance with IEEE 802.11b/g/n
Frequency Band 2.4~2.4835GHz
Extended Frequency DSSS
Modulation Type DBPSK, DQPSK, QPSK, CCK and OFDM (BPSK/ QPSK/ 16-QAM/ 64-QAM)
Data Transmission Rates
IEEE 802.11n: up to 150Mbps(Dynamic)
IEEE 802.11g: 54/48/36/24/18/12/9/6Mbps (Dynamic)
IEEE 802.11b: 11/5.5/2/1Mbps (Dynamic)
Frequency Band
America/ FCC: 2.414~2.462GHz (11 Channels)
Europe/ ETSI: 2.412~2.472GHz (13 Channels)
Japan/ TELEC: 2.412~2.484GHz (14 Channels)
Channel Width 20 or 40MHz
Transmission Distance
Indoor up to 100m
Outdoor up to 300m (it is limited to the environment)
Max. RF Power
(Intentional Radiator)
IEEE 802.11b: 18dBm
IEEE 802.11g: 15dBm
IEEE 802.11n: 15dBm
Receive Sensitivity
130M: -70dBm@10% PER
108M: -72dBm@10% PER
54M: -74dBm@10% PER
11M: -86dBm@8% PER
6M: -91dBm@10% PER
1M: -91dBm@8% PER
Wireless Management Features
Wireless Modes  AP (Multi-SSID)