Igure, Ireless, Ddress – PLANET WNAP-1110 User Manual
Page 67: Iltering

User’s Manual of WNAP-1110
-67-
Click the Previous button to return to the previous page.
For example, if you desire that the wireless station 1 with MAC address 00-30-4F-11-22-33 and the wireless
station 2 with MAC address 00-30-4F-A8-FF-FF are able to access the AP, but all the other wireless stations
cannot access the AP, you can configure the Wireless MAC Address Filtering list by following the steps
below:
Step 1. Click the Enable button to enable this function.
Step 2. Select the radio button: Deny the stations not specified by any enabled entries in the list to
access for Filtering Rules.
Step 3. Delete all or disable all entries if there are any entries already.
Step 4. Click the Add New... button and enter the MAC address 00-30-4F-11-22-33 /00-30-4F-A8-FF-FF in the
MAC Address field, then enter wireless station 1/2 in the Description field, while selecting Enabled in
the Status pull-down list. Finally, click the Save and the Back button.
The filtering rules that configured should be similar to the following list:
Figure 5-47 Wireless MAC Address Filtering