PLANET WNAP-1110 - Manual (Page 66)

User’s Manual of WNAP-1110
-66-
Figure 5-46 Add or Modify Wireless MAC Address Filtering entry
Object Description
MAC Address The wireless station's MAC address that you want to filter.
Description A simple description of the wireless station.
Status The status of this entry either Enabled or Disabled.
To add or modify a MAC Address Filtering entry, follow these instructions:
Step 1. Enter the appropriate MAC Address into the MAC Address field. The format of the MAC Address is
XX-XX-XX-XX-XX-XX (X is any hexadecimal digit). For example, 00-30-4F-11-22-33.
Step 2. Enter a simple description of the wireless station in the Description field. For example, Wireless
station A.
Step 3. Status - Select Enabled or Disabled for this entry on the Status pull-down list.
Step 4. Click the Save button to save this entry.
To modify or delete an existing entry:
Step 1. Click the Modify in the entry you want to modify. If you want to delete the entry, click the Delete.
Step 2. Modify the information.
Step 3. Click the Save button.
Click the Enable All button to make all entries enabled
Click the Disabled All button to make all entries disabled.
Click the Delete All button to delete all entries
Click the Next button to go to the next page