PLANET WNAP-1110 - Manual (Page 16)

User’s Manual of WNAP-1110
-16-
H/W Interface definition
Object Description
Antenna
Detachable 4dBi Antenna with RP-SMA (male) connector.
LAN (Passive PoE)
10/100Mbps RJ-45 port, Auto MDI/ MDI-X & Passive PoE supported
Connect LAN port to the PoE injector to power on the device.
LAN
10/100Mbps RJ-45 port, Auto MDI/ MDI-X
Connect this port to the LAN port of the Router or Ethernet Switch.
Power Connector Connect this port to the 9V DC power adapter to power on the device.
The WNAP-1110 supports only 9VDC power adapter or passive POE injector (RJ45 pin
4, 5: +; pin 7, 8: -). It cannot work with IEEE 802.3af PSE for its power source.
At the same time, either 9V DC adapter from the DC-jack or passive PoE injector from
the UTP LAN port can be connected to the device at one time. Use of two power sources
will damage the device permanently.
!