PLANET WNAP-1110 - Manual (Page 73)

User’s Manual of WNAP-1110
-73-
Figure 5-53 DHCP Settings
The page includes the following fields:
Object Description
DHCP Server Enable or Disable the DHCP server. If you disable the Server, you must have
another DHCP server within your network or else you must configure the
computer manually.
Start IP Address Specify an IP address for the DHCP Server to start with when assigning IP addresses.
192.168.1.100 is the default start address.
End IP Address Specify an IP address for the DHCP Server to end with when assigning IP
addresses. 192.168.1.199 is the default end address.
Address Lease Time The Address Lease Time is the amount of time a network user will be
allowed connection to the AP with their current dynamic IP Address. Enter the
amount of time in minutes and the user will be "leased" this dynamic IP
Address. After the time is up, the user will be automatically assigned a new
dynamic IP address. The range of the time is 1 ~ 2880 minutes. The default
value is 120 minutes.
Default Gateway (Optional.) Suggest to input the IP address of the LAN port of the AP, default
value is 192.168.1.1
Default Domain (Optional.) Input the domain name of your network.
Primary DNS (Optional.) Input the DNS IP address provided by your ISP. Or consult your
ISP.