PLANET FGSW-2840 - Manual (Page 91)

User’s Manual of FGSW-2840 / FGSW-4840S
 Port: Enter the Port number of desired entry.
 LAG ID：Enter the LAG ID of desired entry.
Dymanic Address Table
Select the entry to delete the dynamic address or to bind the MAC address to the
corresponding port statically. It is multi-optional.
 Select
Displays the dynamic MAC Address.  MAC Address
Displays the corresponding VLAN ID of the MAC address.  VLAN ID
Displays the corresponding port number of the MAC address.  Port
Displays the Type of the MAC address.  Type
Displays the Aging Status of the MAC address.  Aging Status
Setting aging time properly helps implement effective MAC address aging. The aging time that is too
long or too short results decreases the performance of the Managed Switch. If the aging time is too
long, excessive invalid MAC address entries maintained by the Managed Switch may fill up the MAC
address table. This prevents the MAC address table from updating with network changes in time. If
the aging time is too short, the Managed Switch may remove valid MAC address entries. This
decreases the forwarding performance of the Managed Switch. It is recommended to keep the default
value.
Buttons
: Click to apply changes.
: Click to search.
: Click to select all the current MAC Address.
: Click to delete the current MAC address.
: Click the Bind button to bind the MAC address of selected entry to the corresponding port statically.
: Click to display help web page.
91