10 reset command, 11 tracert command, 12 clear command – PLANET FGSW-2840 User Manual
Page 243: 13 exit command, 14 history command
User’s Manual of FGSW-2840 / FGSW-4840S
243
6.2.10 reset command
Description:
The reset command is used to reset the Managed Switch’s software. After resetting, all configuration of the Managed
Switch will restore to the factory defaults and your current settings will be lost
Syntax:
reset
6.2.11 tracert command
Description:
The tracert command is used to test the connectivity of the gateways during its journey from the source to destination of the
test data
Syntax:
tracert {ip-addr} [maxHops]
6.2.12 Clear command
Description:
Clear statistic
Syntax:
clear counters
clear IP
clear logging [ buffer | flash ]
6.2.13 exit command
Description:
The exit command is used to return to the previous Mode from the current Mode
Syntax:
exit
6.2.14 history command
Description:
The history command is used to show the latest 20 commands that entered in the current mode since the Managed Switch
is powered. Also clear all the commands that entered
Syntax:
history / history clear